Description
Explore our Tough Resin, perfect for creating durable, impact-resistant parts that can withstand high stress and strain. It is ideal for functional prototypes, end-use parts, jigs, fixtures, and tooling applications.
Tough is a high-strength UV curable resin designed for demanding applications. Its low odor emission and rapid prototyping capabilities make it ideal for use with 405nm LCD equipment. This resin offers a high success rate in printing and exceptional strength and bending resistance after molding. MOLEGRID™ Tough is suitable for applications requiring high strength and a certain degree of toughness, such as clips, gears, and other parts. It is widely used in corporate technology centers, by individual players, and in workshops that require high-performance materials.
Recommended Applications:
- Connectors
- Vulnerable structures
- Wear-resistance structure
Key Features:
- High toughness
- Bending resistance
- Easy to model.
Technical Specifications:
- Tensile Strength: 47.5MPa
- Elongation at Break: 33.4%
- Flexural Modulus: 1176MPa
- Notched Impact Strength: 55.60J/m
- Hardness (Shore D): 80D
- HDT@0.45MPa (66psi): 51.2℃
For more detailed safety data sheets and additional information, Link Bellow
[Instructions for use]
1.PREPARATION: Please shake well before use, if not be mixture by shaking enough, it may cause color variation and quality problems.
2.PRINTING: Pour the liquid resin into the 3D printer tank, follow the 3D printer instruction manual to print.
3.TAKE OFF: Use a scraper to remove the model after printing.
4.CLEANING: Immerse the model in alcohol or isopropanol with a concentration of more than 95%, and then ultrasonically clean it for 2 minutes to remove the uncured resin on the surface.
5.REMOVE THE SUPPORT: Use the scissors to remove the support if necessary.
6.Clean: clean the model with clean compressed air to ensure no alcohol and impurity residues.
7.Post-curing: post-curing treatment when placed in a UV curing box (refer to the TDS of the corresponding material for the post-curing process).
[Precautions]
1.lt is suitable for 405nm light source equipment.
2.This is the material of acrylic liquid with a slight odor. Please avoid direct contact with people. Please wear protective gloves, protective glasses, protective masks and protective clothing when using it.
3.Not eatable, if accidentally swallowed, rinse your mouth, and do not induce vomiting; if you feel unwell, please call the doctor immediately
4.The material requires proper printing parameters to achieve the best results.
5.The original packaging is harmful to the environment; the remaining liquid material waste cannot be discarded and should be treated as chemical products or treated as solid waste after fully solidified.
6.Please make sure to use it under the recommended environmental conditions. Humidity, low temperature, or high temperature printing environment may cause the quality of printed parts to decrease or even print failure.
[Production Date] See packaging label
[Expiry date] 24 months if the bottle sealed
[Storage Precautions]
Keep away from light, dry and ventilated environment, sealed and stored at room temperature.
[Packing]
The material uses PE bottles and paper packaging.
Jessica –
It is exactly what I need