Description
Explore our Gray Light01 Resin, resin is perfect for creating detailed models, prototypes, and parts that require a smooth, light gray finish. It is ideal for applications where visual appeal and fine detail are important.
Recommended Applications:
- Model manufacturing
- Design verification
- Cultural periphery
Description:
Gray Lite 01 is a high-cost performance UV curable resin designed for 405nm LCD equipment. It offers low odor emission, rapid prototyping, and a high success rate in printing. This resin provides high strength while retaining a certain degree of toughness after molding. Widely used in model manufacturing, cultural periphery, and design, MOLEGRID™ Gray Lite 01 is especially suitable for studios and individual players seeking reliable performance.
Key Features:
- High precision
- Premium texture
- Balanced strength and toughness
Technical Specifications:
- Tensile Strength: 40.0MPa
- Elongation at Break: 17.0%
- Flexural Modulus: 2632MPa
- Notched Impact Strength: 25.00J/m
- Hardness (Shore D): 87D
- HDT@0.45MPa (66psi): 59.8℃
For more detailed safety data sheets and additional information, please Click MSDS-Gray Lite 01-EN
[Instructions for use]
1.PREPARATION: Please shake well before use, if not be mixture by shaking enough, it may cause color variation and quality problems.
2.PRINTING: Pour the liquid resin into the 3D printer tank, follow the 3D printer instruction manual to print.
3.TAKE OFF: Use a scraper to remove the model after printing.
4.CLEANING: Immerse the model in alcohol or isopropanol with a concentration of more than 95%, and then ultrasonically clean it for 2 minutes to remove the uncured resin on the surface.
5.REMOVE THE SUPPORT: Use the scissors to remove the support if necessary.
6.Clean: clean the model with clean compressed air to ensure no alcohol and impurity residues.
7.Post-curing: post-curing treatment when placed in a UV curing box (refer to the TDS of the corresponding material for the post-curing process).
[Precautions]
1.lt is suitable for 405nm light source equipment.
2.This is the material of acrylic liquid with a slight odor. Please avoid direct contact with people. Please wear protective gloves, protective glasses, protective masks and protective clothing when using it.
3.Not eatable, if accidentally swallowed, rinse your mouth, and do not induce vomiting; if you feel unwell, please call the doctor immediately
4.The material requires proper printing parameters to achieve the best results.
5.The original packaging is harmful to the environment; the remaining liquid material waste cannot be discarded and should be treated as chemical products or treated as solid waste after fully solidified.
6.Please make sure to use it under the recommended environmental conditions. Humidity, low temperature, or high temperature printing environment may cause the quality of printed parts to decrease or even print failure.
[Production Date] See packaging label
[Expiry date] 24 months if the bottle sealed
[Storage Precautions]
Keep away from light, dry and ventilated environment, sealed and stored at room temperature.
[Packing]
The material uses PE bottles and paper packaging.
Oliver –
I wish I have found this kind of resin earlier. Great my son love it. Very detailed