Description
Texture is a high-cost-performance UV curable resin designed for use with 405nm LCD equipment. It emits low odor and allows for rapid prototyping with a high success rate of printing. This resin offers high strength while retaining a certain degree of toughness after molding, making it suitable for a variety of applications including model manufacturing, design verification, and cultural periphery. MOLEGRID™ Texture is widely used in these fields and is particularly favored by studios and individual players.
Recommended Applications:
- Model Manufacturing
- Design verification
- Cultural periphery
Key Features:
- Colorful
- High precision and easy to model.
- Low cost but value for money
Technical Specifications:
- Tensile Strength: 40.0MPa
- Elongation at Break: 17.0%
- Flexural Modulus: 2632MPa
- Notched Impact Strength: 25.00J/m
- Hardness (Shore D): 87D
- HDT@0.45MPa (66psi): 59.8℃
[Instructions for use]
1.PREPARATION: Please shake well before use, if not be mixture by shaking enough, it may cause color variation and quality problems.
2.PRINTING: Pour the liquid resin into the 3D printer tank, follow the 3D printer instruction manual to print.
3.TAKE OFF: Use a scraper to remove the model after printing.
4.CLEANING: Immerse the model in alcohol or isopropanol with a concentration of more than 95%, and then ultrasonically clean it for 2 minutes to remove the uncured resin on the surface.
5.REMOVE THE SUPPORT: Use the scissors to remove the support if necessary.
6.Clean: clean the model with clean compressed air to ensure no alcohol and impurity residues.
7.Post-curing: post-curing treatment when placed in a UV curing box (refer to the TDS of the corresponding material for the post-curing process).
[Precautions]
1.lt is suitable for 405nm light source equipment.
2.This is the material of acrylic liquid with a slight odor. Please avoid direct contact with people. Please wear protective gloves, protective glasses, protective masks and protective clothing when using it.
3.Not eatable, if accidentally swallowed, rinse your mouth, and do not induce vomiting; if you feel unwell, please call the doctor immediately
4.The material requires proper printing parameters to achieve the best results.
5.The original packaging is harmful to the environment; the remaining liquid material waste cannot be discarded and should be treated as chemical products or treated as solid waste after fully solidified.
6.Please make sure to use it under the recommended environmental conditions. Humidity, low temperature, or high temperature printing environment may cause the quality of printed parts to decrease or even print failure.
[Production Date] See packaging label
[Expiry date] 24 months if the bottle sealed
[Storage Precautions]
Keep away from light, dry and ventilated environment, sealed and stored at room temperature.
[Packing]
The material uses PE bottles and paper packaging.
Reviews
There are no reviews yet.